How to Fix 1E Error in Samsung Washing Machine

What on Earth is the 1E Error on Your Samsung Washing Machine?

Imagine you’re all set to toss your week’s laundry into the washing machine, but your Samsung washer flashes 1E on the display like it’s telling you, “Nope, not today!” Well, that cheeky code actually means there’s trouble detecting the water level — the machine’s pressure sensor (aka water level sensor) isn’t playing nice. Cue the dramatic pause.

In layman’s terms: your washer can’t figure out if it’s full, empty, or somewhere in between.

Before You Get Your Toolbox Out: Safety First!

Stop. Unplug that bad boy! You don’t want to get zapped while trying to do some laundry wizardry. After unplugging, take 5 (or 10) minutes—grab a coffee or contemplate your latest DIY triumph—and then plug it back in. Sometimes, a simple reboot resets the system and kicks the 1E error to the curb on its own.

Step 1: Check Your Water Supply Like a Pro

Sounds obvious, but let’s be honest—sometimes the basics get overlooked. Make sure:

Your water taps are fully open.
The hose isn’t kinked, twisted, or pinched in a bizarre laundry room accident.
The water pressure is up to scratch. Low pressure? The washer can’t fill properly.

No water, no glory. This step might save you from diving deeper into the dreaded wiring jungle.

Step 2: Inspect the Pressure Sensor and Wiring – The Heart of the Matter

Here’s where things get technical but bear with me — this is essential troubleshooting territory.

Locate the pressure sensor: Pop the back cover off your washing machine (safely, remember) and hunt for the water level sensor. If you need a visual walkthrough, check out this handy video.
Disconnect the sensor connector: Detach it carefully. Now, check both the sensor and the machine’s PCB connector for dirt, grime, or pesky carbon deposits.
Clean it up: Use a toothbrush and a contact cleaner to scrub away crud. You’ll be surprised how often dirt is the invisible culprit.
Check wiring continuity: Use a multimeter to test the wiring. No continuity? Your cables might be chewed up by rodents or corroded—time for replacements.
When in doubt, swap it out: If wiring and connectors are pristine but the 1E error persists, the pressure sensor itself is probably kaput and should be replaced.

This sensor drama is often the villain behind the 1E code, so tackling it head-on maximizes your chances of victory.

Step 3: Don’t Forget to Check the Drainage System

Clogged drains and jammed pumps can mess with water level detection too. If the water isn’t exiting gracefully, the machine may get confused. Make sure your drain hose is clear and the pump is doing its job.

Step 4: Mechanical Inspection – Nosey But Necessary

Peek around for any other mechanical hiccups that might block or jam sensor parts. Sometimes lint, sock monsters, or mysterious soap scum build-ups interfere more than you’d expect.

Step 5: Test Drive & Call for Backup If Needed

After your cleaning, fixing, or part swapping, run a quick cycle to see if your Samsung washer has forgiven you. If the 1E error code stubbornly refuses to vanish, it’s time to call in the pros. Samsung’s official support page offers handy troubleshooting tips, and their technicians know how to get those machines humming again.

Bonus Tips to Keep Your Samsung Washing Machine Happy

Use quality water hoses to avoid quick wear and tear.
Keep the machine’s exterior and connectors clean to prevent grime buildup.
Extend your washing machine’s life by learning how to extend Samsung washing machine warranty.

Where to Get Replacement Parts Without Breaking the Bank?

If you need quality pressure sensors, wiring harnesses, or maintenance kits, you can find reliable options on trusted shopping platforms. For shoppers in India, check out Amazon India. For global customers, including the USA, Amazon Global has you covered.