Godrej refrigerators are among the most popular in Indian homes, and their digital models display error codes when a fault is detected. This guide lists every common Godrej refrigerator error code, what it means, and how to resolve it at home.
Godrej Refrigerator Error Code Table
| Code | Meaning | Fix |
|---|---|---|
| E1 | Fridge compartment sensor open circuit | Unplug 5 min; replace fridge sensor |
| E2 | Fridge compartment sensor short circuit | Check wiring; replace sensor |
| E3 | Freezer sensor open circuit | Defrost; replace freezer sensor |
| E4 | Freezer sensor short circuit | Check wiring; replace sensor |
| E5 | Defrost sensor open circuit | Manual defrost; replace defrost sensor |
| E6 | Defrost sensor short circuit | Check wiring to defrost heater/sensor |
| E7 | Condenser sensor fault | Clean condenser coils; reset power |
| E8 | Evaporator fan fault | Defrost; check fan for ice blockage |
| EH | High temperature alarm | Check door seals; reduce load; reset |
| EC | Communication error | Unplug 10 min; call Godrej service |
Most Common Godrej Error Codes Explained
E1 / E2 — Fridge Compartment Sensor Errors
E1 (open circuit) and E2 (short circuit) both relate to the refrigerator compartment temperature sensor. An open circuit means the sensor’s connection is broken; a short circuit means the wiring is damaged. In both cases, the control board cannot read the fridge temperature and may run the compressor continuously or not at all.
Fix: Unplug the fridge for 5 minutes. If the code returns, the sensor needs replacement — a straightforward job for a Godrej service technician.
E3 / E4 — Freezer Sensor Errors
These codes relate to the freezer compartment sensor. E3 is an open circuit; E4 is a short circuit. Heavy frost build-up can damage sensor wiring over time.
Fix: Manually defrost the fridge (unplug, leave open 24 hours). After defrost, if the code clears, the sensor was affected by ice. If it returns, replace the sensor.
E5 / E6 — Defrost Sensor Errors
The defrost sensor monitors the evaporator coil temperature to ensure the heater turns off at the right time. A faulty defrost sensor causes excess frost buildup or, in the case of a short circuit, may cause the heater to not activate at all.
Fix: Run a manual defrost cycle. If the error recurs, call a Godrej technician to replace the defrost sensor and check the heater element.
EH — High Temperature Alarm
EH appears when the fridge temperature rises above the safe threshold — usually due to a long power outage, overloaded shelves, or a door left ajar. Check your door seals for gaps, reduce food load, and ensure the fridge is not placed against a wall with no ventilation.
When to Call Godrej Service
- Error code returns after reset and manual defrost
- Fridge is not cooling despite no active code
- EC (communication error) — requires authorised service
- Compressor is hot to the touch or not running
Godrej India service: 1800-209-5511