How to Reset Washing Machine: The Ultimate Guide

Why Reset Your Washing Machine?

Let’s be honest — your washing machine isn’t a magician, but sometimes it acts like it’s practicing dark arts. Error codes, stuck cycles, or unresponsive controls can make laundry day feel like a quest for the Holy Grail. Resetting your washing machine is like giving it a quick nap to clear its digital cobwebs and hit the refresh button.

A reset can resolve many common issues without calling in the cavalry (read: technician). It helps clear error codes, resolves glitches, and can get your washer humming smoothly again.

The simplest and most widely recommended method? The classic power reset — aka the “unplug and plug back in” magic trick. Ready to become your washing machine’s white knight? Let’s dive in.

Step-By-Step: How to Reset a Washing Machine

Here’s the no-nonsense guide that works for most brands and models, from top loaders to front-loaders.

1. Turn Off and Unplug

First things first: stop the machine and yank it from the power socket. This isn’t unplugging your phone to save battery — it’s a full system reboot. Removing power cuts all electricity and resets the system’s internal controller.

2. Wait Patiently (The Hardest Part)

Give it a breather. Wait for at least 1 to 5 minutes (depending on your model). This pause allows residual electric charges inside the machine to dissipate, which can help wipe away any lurking software gremlins.

3. Plug It Back In and Restart

Now, plug your washer back in and turn it on. Most machines will reset their control boards and get ready to tackle your next pile of dirty laundry. You may need to select your cycle again, but hey — that’s a small price for having a responsive washing buddy.

Bonus: Using the Circuit Breaker

If unplugging is a hassle (say, your washer is hardwired or behind an impenetrable cabinet), you can turn off the power at the circuit breaker instead. Flip it off, wait a few minutes, then flip it back on. Same idea, different switch.

This approach is recommended for most brands as well, ensuring a full electronic reset without wrestling with tough-to-reach plugs.

Make It Official: Use Control Panel Buttons

Many modern washers offer button combo resets that can be quicker than unplugging. For instance:

  • Hold the “Cancel” or “Stop” button for about 3 seconds to initiate a reset on Whirlpool models source.
  • GE washers sometimes reset when you open and close the lid six times within 12 seconds until you hear a beep source.
  • Pressing and holding the “Start/Pause” button for 5–10 seconds or pressing “Start” + “Cancel” simultaneously for 10 seconds can trigger resets on some brands source.

Why use button combos? Because sometimes, even your washing machine likes a quick mental reboot before the full unplug routine. It’s like the tech equivalent of a power nap.

Brand-Specific Reset Tips

Because each brand has its quirks and personalities, here’s the scoop on popular models:

LG Washing Machines

For LG washers, start with the classic unplug for 5 minutes trick. Some models ask you to press and hold the power button, unplug the washer while holding it, then release and power back on to fully reset the electronics source.

By the way, LG top-loading washers have their own reset quirks too — if you need tailored knowledge, check our detailed guide on how to reset LG top loading washing machines.

Whirlpool and Maytag

Whirlpool and Maytag washers often require a reset followed by a recalibration procedure. After unplugging, you may need to turn the cycle dial to “Off,” then to a setting such as “Normal,” pressing “Start” to run a quick recalibration cycle source. This process helps the washer recalibrate its sensors and drum balance.

Samsung

Samsung advises unplugging for a good minute then rebooting your cycle. Some models also suggest checking the door lock and cycle settings, plus pressing a combo like “Power” and “Spin” to reset source.

GE Washers

GE washers get fancy with resets — try turning the power off at the breaker, then opening and closing the lid six times within 12 seconds once power is restored until you hear the confirmation beep source. Alternatively, holding “Start/Pause” for 5–10 seconds will sometimes do the trick.

Troubleshooting Beyond Resetting

Think of resetting as your washing machine’s equivalent of “turning it off and on again.” It’s the first sword you draw, but sometimes the dragon persists.

If your machine stubbornly refuses to reset or problems keep popping up after a reset, you might be dealing with:

  • A faulty door lock or latch preventing the machine from starting.
  • Broken water inlet valves or clogged hoses stopping water flow.
  • Sensor failures, like unbalanced load sensors or control board issues.
  • Drainage problems causing error codes.

In those cases, resetting might be just a band-aid. It’s time to check specific error codes (usually displayed on your machine’s screen) or call in a professional.

Need to replace a valve? Our detailed tutorials on how to replace Watts washing machine shutoff valve and replace washing machine valve UK provide pro tips.

When to Reset vs. When to Call a Pro

Resetting your washer is a fab first step for quirky electronic hiccups or error codes. But let’s get real — if after a reset, the washer refuses to spin, fill, drain, or behaves like it’s haunted, it’s time for the pros.

  • Strange noises or persistent leaks.
  • Error codes that keep coming back after resets.
  • Washer door won’t lock or unlock properly.
  • Failure to power on at all despite resets.

DIY is fun, but safety first — electrical repairs or internal mechanical faults should be left to certified technicians.

Handy Accessories for Washing Machine Care

While you’re keeping your washer in check, a few practical accessories can save time and trouble:

  • Surge protector: Protect your washing machine’s sensitive electronics from power spikes.
  • Regular cleaning tablets: Prevent buildup inside your washer and keep it smelling fresh.
  • Water shutoff valve: Essential for quick fixes and maintenance. Need a replacement? Check options on Amazon: India | Global/USA.

Final Takeaway

Resetting your washing machine is the simplest troubleshooting step that often fixes minor glitches and clears error codes. Unplugging, waiting, and plugging back in may sound deceptively simple, but it resets the complex electronics inside your washer.

Start here before jumping into complicated repairs or expensive calls. And remember, when in doubt, your washing machine’s manual and brand-specific guides are your trusty sidekicks.